Ok guys finally installed my pacesetter lt and y pipe. Decided to keep borla muffler that i previously had welded in. Well know i think its to small or something with the increased flow. Need advise in changing muffler. Want it to be quiet at idle and crusing levels but want it to scream at wide open throttle expecially from 3000 to 6500 rpms. My current borla sounds like an old school truck with bullets at WOT. Want to regain lost deep tone and agressiveness with new era manners< Help guys!!!

 

im not sure but you might want to try the corsa mufflers, i think you might like them for what you want.

 

hooker aerochamber

 

corsa and pacesetter+y isnt exactly quiet at idle...i had to add another magnaflow with my corsa to tame it down some but now i think its too tame

 

who needs a muffler?

 

yeah well i just want something with a tone the currebt borla has no tone. I guess all u can hear is rasp, I that is what rasp is. I can deal with the idle and partial acceleration its the WOT that gets me

 

How about Spin Tech, these thing are as solid as it gets. There are some great reviews out there aboiut them as well, not to mention that they are inexpensive as well.

 

spintech dosent look like it would flow as good as a magnaflow, bullet, corsa etc etc.

 

Looking at the charts on the site they claim to flow better than a Borla or Flowmaster.

http://www.spintechmufflers.com/spin...eet%20scan.jpg

 

MAGNAFLOW. If thats too loud, get a bullet and use it as a resonator. If you buy the 4x9x11, it will be loud without the bullet trust me. Id get the 5x??