99 Silverado with a 5.3. putting in a comp cam springs and push rods. i don't want to pay more that 400 for the install. but will if necessary.

know of a good shop let me know

 

You need to PM <user> on here his name is <name> I believe he does them for around that much.

 

isnt there like 20 shops that are big internet lsx super stores in that area ?

 

give <user> a shout .... hes highly rec. on other sites as well

 

Yeah that will charge you 700-1000 to do it.

 

TSP charges 450 I believe.

 

any monkey can do a cam swap. its takes skill to degree and set preload correctly 700-1000 is decent labor for a FULL swap..

HPE did/does $1,300 cam/springs/labor/tune

 

Can't really tell (no punctuation) if he wants cam, springs and pushrods or Comp Cam springs and pushrods installed. Either way, springs don't require preload set and cam swaps are a breeze. No need to "degree" (other than lining the timing dots up) the cam.

Colekill. Did you get it done? If all you want are springs and pushrods. The cam will be a bit more. I've done several cam/springs/pushrods swaps on the trucks and the F-Bodys. Let me know.

 

Let's keep in mind this is still a sponsored site.