jiar577

iTrader: (2)

On my truck (1500) I didn't removed the radiator, just loosened the bolts and there was enough room to install the cam. It came with e-fans from the factory.

seadoo

bumb... seeing how you were coming...

akcooper9

Update time... Cam is still sitting waiting to be installed...

BUT last week I accepted a new job in Texas so for the move, I dropped the coin on 4.56s to get me back to stock with my 285/75s. Meet BBP this afternoon for a quick tune update to fix the ABS and Brake light issue and correct the speedo.

Truck drives so much better with he gears. It should tow 10x better. The plan for the cam to go in is still in the works but not until after the move which takes place in 17 days.

lowburb

How's the move? Ready to install the Cam??

akcooper9

I returned home Friday. Packers loaded us up yesterday and we are in NM wilth 700 miles left

http://db.tt/OHJTYMVh

lowburb

Still a bit of relocating work ahead of you then. Good luck!

05HD1500

Bump on an old thread... Interested in results!

catman3516

I have a 2002 1500hd ccsb 2wd. I run a comp xfi 266 212/216-.520/.524-115 stock heads,ls6 blue springs,tsp lt headers,tru duals,maggy mufflers to the bumpers,aem intake kit,black bear tuning. I like it with stock 3.73 gears and stock verter with 265/75-16 tires but will be switching to 295/75-16 and 4.56s
I was told no lope and chop but heres my exhaust clip

03sierraslt

iTrader: (22)

If that is the cam you have in a 6.0 and it lopes like that then the tune needs work.

GMCtrk

iTrader: (27)

Sounds okay to me. Even my baby 212 cam has a good cold lope.