looking for a cam.

Reply Subscribe

Thread Tools

Search this Thread

Jan 23, 2008 | 07:45 PM

#11

ghosbwt

Teching In

Joined: Jan 2007

Posts: 25

Likes: 0

From: Lawton Oklahoma

you ever go out on thirty-ninth up in the city

Jan 23, 2008 | 07:46 PM

#12

Phantom

11 Second Club

iTrader: (16)

Joined: Sep 2006

Posts: 5,694

Likes: 50

From: The 405

you don't have to pull the heads to do a cam swap

Jan 23, 2008 | 07:48 PM

#13

ghosbwt

Teching In

Joined: Jan 2007

Posts: 25

Likes: 0

From: Lawton Oklahoma

you say that but ive had a lifter fall and that was no fun!!! so from then on I PULLED THE HEADS!!

Jan 23, 2008 | 07:49 PM

#14

05Red5.3

Thread Starter

On The Tree

Joined: Sep 2007

Posts: 137

Likes: 0

so if i buy the heads cam and every thing i need how much will u do it for shoot me a PM.

Jan 23, 2008 | 07:51 PM

#15

Phantom

11 Second Club

iTrader: (16)

Joined: Sep 2006

Posts: 5,694

Likes: 50

From: The 405

there have been hundreds of cam swaps just on this site without the heads being pulled...no problems if you get some dowel rods or the "special" tools to do it...there is no need to pull the heads...

Jan 23, 2008 | 07:53 PM

#16

05Red5.3

Thread Starter

On The Tree

Joined: Sep 2007

Posts: 137

Likes: 0

oh man this is tough stuff knowing nothing about it. just dont wanna get screwed over. thats happend to me once with extreme performance they F'd me over bad on my TA and then closed down.