How About This Setup Guys??
#12
Originally Posted by getchusum99
aight ill wait til i hear it , my freind has a single in dual out stainless magnaflow on his titan and it sounds ok but not deep or loud enough for me
The Titan is gonna sound different, it has a different size motor. Plus theres other factors in how a exhaust is gonna sound. My buddy have a Toyota Tundra and he made his own custom fabed Corsa exhaust. He bought a corsa muffler and bent his own stainless pipping for it. Another buddy of ours has corsa on his Tahoe, and he wanted his truck to sound like the Tahoe. To say the least, it sounded like SH*t
#13
Ive got magnaflow on mine too, gutted cats with 3" in/out single(its an 18in muffler) and a mandrel bent tail pipe and a big flashy tip(18x4)...lol here is a video clip of a burnout so you can get an idea of what is sounds like...smokin20's
Last edited by 99BlAcKz71; Feb 21, 2006 at 12:52 AM.
#14
Thread Starter
TECH Resident
iTrader: (1)
Joined: Mar 2004
Posts: 910
Likes: 0
From: Baton rouge ,LA
99blackz71 that clip of the magnaflow sounds great! im definately reconsidering the flowmaster. plus ima go with a turndown after the axel so mine might be a lil deeper... onebadrubi..i got that bassani muffler off of my cousins totaled 97cobra, it was practically brandnew only a week on the car when he decided to wrap the car around a lightpole at about 65mph street racing , he's a dumba$$.anyways it was a complete bassani setup from the cats ,x-pipe and dual 2 1/2 mufflers, it was the only thing left on the car really worth anything except 3 of the wheels. he owed me so i went over there and tred unbolting the setup but the drivers side cats was crushed , so i broke out the sawzall and went to town so now i have the x-pipe and the 2 mufflers. so i put one of them on my truck when i gutted my cats , cause all i had at that time was straight pipes, so there ya go, long story, lol. the sound is ok but not what i want , that model muffler is not meant to be put on an ls1 based truck.
#17
Thread Starter
TECH Resident
iTrader: (1)
Joined: Mar 2004
Posts: 910
Likes: 0
From: Baton rouge ,LA
if i wouldve looked at the page earlier i wouldve called ya , we were dead slow today at work. so i installed my painted mirror covers and door handels and took some interior pieces out of my truck and prepped them for my buddy to paint tomm or wends.tomm i wont be there , i have to attend a funeral. but i took your cell number down in my phone so i can give ya a call sumtime.DENNY
#19
I had my whole exhaust done at an exhaust shop that would do some "illegal" stuff and I got everything for under $264 including the gutted cats.
**I posted the full video up there^^^ now which has an in cab run and an idle with revs too**
**I posted the full video up there^^^ now which has an in cab run and an idle with revs too**
#20
Originally Posted by getchusum99
where did ya order your magnaflow from, and what about one long one with a 3inch/single/in/out? the longer muffler makes a deeper tone correct?
I ordered mine from Dubsilverado, but you can get them at any performance place (jegs, Summit, etc.) The bigger muffler is quieter, Im not sure about tone, it may be a little different. A buddy of mine was in town he has the catback system on his, it sounds good, but I like mine better.
I thought I may have seen you yesterday, a black rc Z71 with esky handles and mud tires and a small lift was turning onto Airline out of that side street, So I threw a rev at him thinking it may have been you
Oh well.



at WOT. Best bang for the buck IMO. Just get 2 1/2". 3" is overkill IMO.