Does anyone have a parts list for the Home Depot (home made) intake tube?

Since installing e-fans, my stock intake "thing" looks really out of place.

Thanks.

 

if you can get the parts at home depot, get a 4" 45 degree rubber tube, 4" 90 degree rubber tube, and a 4" one foot long aluminum or metal tube. this is what i used. also you will need some clamps. 02denali has a nice pic of his set up. he only used the 90 degree tube and the entire length of the metal tube. i used the 90 from the tb and connected it to the 45 using part of the metal. then into the corragated factory stuff.

 

Pics?

 

Where's BigTex at? He's got a PVC special

 

Sweet.

What size tubing do I need to feed into the corrogated stock stuff? (By that you mean the rubber accordian piece, right?) Did you just hack off the pipe at that part, or were you sucessfull at removing the rubber from the plastic?

Edit: Duh... You said 4" like, three times there. Sorry, I'm a littled burned out right now. Long day.

 

http://shop.airflowonline.com/Merchant2/merchant.mv