LMAO ... I was thinking pretty much the same thing as Oxi ..

I know absolutely nothing almost about N2o, but this guy seems like a genuine stupid ***! I mean .. look at the top of that motor! That just screams, I did this in an hour and my motor is gonna pop.

Geez .. people just amaze me sometimes!

Look for him to follow up with a big fat picture of his truck after it has

BTW .. don't they make bottle heaters? And aren't those bottles kinda small for that much spray on a 6.0 ????

Parish .. to answer your question, if that was a real denali, then it was AWD. On the 7th picture down, the one just before the burnt to hell and back plugs, you can see Denali on the door, and obviously he didn't put that front clip on since the bumper looks like it is bolted down right and not duct taped on.

 

Looks bad (it is difficult to make a clean nitrous setup), torching the bottles, and those MELTED plugs!!! Come on guys do you have ANY clue how nitrous works???

If you backfire, you have engineering problems!

 

What a steal! That's gonna be an awesome swap.

 

Damn, I just posted it to tell you about it. Didnt think you would really uy it. Hella good deal!!

 

That's a nasty looking install. Bottle heaters are made. You need a TON of fuel for that setup. Tiny gap plugs. Etc.

Hell my 14 year old brother knows more about a nitrous setup (courtesy of me! ) than these ********.

BTW...I wonder if the truck had any mods at all?

 

That is hilarious....thanks for the laugh Parish!

 

Judging from the first pic, it looks like there is a open filter intake setup there.



From that picture, it looks like the stock air tube of a 99-01 truck. I would guess they have an AirAid intake, which is like the cheapest of all. If you look closely ... it looks like the end of that baffle is cut open so that air can come in the end of the baffle. That's gotta be worth an extra 15-20 horses!

I would hope .. if he is moving that much N2o through, or trying to, without blowing the heads off the motor or a melted piston or 2 into the crankcase, he would have a nice free flowng exhaust, but from the looks of it .. you couldn't be to sure about this guy.

BTW .. another thing that Hit Man pointed out ... that setup should take a ton of fuel. Did you notice that measly little fuel cell in the front of the bed? I would think that would only last 1 good run, which is probably about how long those 2 wimpy size bottles would last with that setup.

I think I've seen rice burners with more nitrous in them than that and probably even a smaller shot feeding half the motor that goof is.

 

there is NO way of telling through that pic you put up there if he has an open element intake, and the end of that baffle isn't cut out, it's STOCK.

 

buncha fools. Those were they guys that came in here with the low 11 second truck vid

 

no i thought those guys were blown also. if we are talking about the same people. It was like rpm motorsports or something like that.

also i thought the truck was a black 03 chevy.