Group Purchase on A.R. Headers!!!
Jan 10, 2009 | 12:17 PM
#41
Thread Starter
Registered User
Joined: Aug 2008
Posts: 257
Likes: 0
We normally see between 20 and 30rwhp and aproximately 25ft-lbs of tourque most of our data has been with 6.0,6.2 engines though but we think the gains should be similar
Jan 12, 2009 | 11:47 PM
#43
There will be no 2" primary unless your making nearly 1000hp or have a 450+ cubic inch LSX you'll be fine with a 1-7/8's we have supercharged corvettes with a 1-7/8's system making 1000hp. It's a short primary around 23" so unless your combo is very extreme you should be fine with the 1=7/8's
Mar 5, 2009 | 10:10 PM
#48
Thread Starter
Registered User
Joined: Aug 2008
Posts: 257
Likes: 0
What exactly due you want to know I think we got the ten sets we were looking for plus or minus 1 or 2 I honestly don't remember and I do the board surfing from home.
The horror house is about a mile from the shop so we're safe, or are WE
The horror house is about a mile from the shop so we're safe, or are WE
Mar 6, 2009 | 08:59 AM
#49
TECH Fanatic
Joined: May 2004
Posts: 1,087
Likes: 0
From: Cibolo Tx
The original movie was pretty good.
Mar 6, 2009 | 05:34 PM
#50
I was asking in hopes this might go down again. I am going to be ordering a set here soon and was a bit late to get on the GP train this time. So I was seeing if it was worth waiting to try and grab em up again a little later on.