get out your cam card!!!
#1
trying out some new software trying to make a custome cam.need some basline numbers ivo(btdc) evo(bbdc) ivc(abdc) evc(atdc) int duration, exh duration, int centerline, lobe-center angle, int lift at valve, exh at valve,thank you in advance!!!!!!!!!
i'll buy you a beer somtime or somthing
i'll buy you a beer somtime or somthing
#2
..........................Intake.........Exhaust
Lobe lift:...............0.308...........0.308
Lobe Centeriline:.....109*............115*
Duration @ .006":....271..............280
Duration @ .050".....218..............227
LSA: 112*
You should be able to get the IVO, IVC, EVO and EVC from that.
Lets see if the kids viewing at home can tell what cam this is.
Lobe lift:...............0.308...........0.308
Lobe Centeriline:.....109*............115*
Duration @ .006":....271..............280
Duration @ .050".....218..............227
LSA: 112*
You should be able to get the IVO, IVC, EVO and EVC from that.

Lets see if the kids viewing at home can tell what cam this is.
#3
Originally Posted by vanillagorilla
..........................Intake.........Exhaust
Lobe lift:...............0.308...........0.308
Lobe Centeriline:.....109*............115*
Duration @ .006":....271..............280
Duration @ .050".....218..............227
LSA: 112*
You should be able to get the IVO, IVC, EVO and EVC from that.
Lets see if the kids viewing at home can tell what cam this is.
Lobe lift:...............0.308...........0.308
Lobe Centeriline:.....109*............115*
Duration @ .006":....271..............280
Duration @ .050".....218..............227
LSA: 112*
You should be able to get the IVO, IVC, EVO and EVC from that.

Lets see if the kids viewing at home can tell what cam this is.
Thread
Thread Starter
Forum
Replies
Last Post
lawhitediamante
INTERNAL ENGINE MODIFICATIONS
5
Aug 12, 2015 12:14 PM
banker099
TECHNICAL WRITE-UPS
0
Jul 4, 2015 05:50 PM




