Catch Can results
Jun 14, 2006 | 08:22 AM
#1
Catch Can results
I pulled my My J-Tube off my RADIX last knight to do the 90mm mod,
and I was amazed that there was NO oil in the intake or blower at all.
I Installed the Catch Can at the same time I did the RADIX Install, the truck only had 753 miles on it that was a year ago and 11,000 + Hard miles.
Pics
and I was amazed that there was NO oil in the intake or blower at all.
I Installed the Catch Can at the same time I did the RADIX Install, the truck only had 753 miles on it that was a year ago and 11,000 + Hard miles.
Pics
Jun 14, 2006 | 09:22 AM
#2
Louis, mine looked the same way, nice and clean, no oil at all and i don't even have a catch can.
Oh, btw, did you note the throttle blade at WOT throttle, then again after the 90mm is installed? Did your 90mm TB open all the way?
Oh, btw, did you note the throttle blade at WOT throttle, then again after the 90mm is installed? Did your 90mm TB open all the way?
Jun 14, 2006 | 09:33 AM
#3
Originally Posted by Holty
Louis, mine looked the same way, nice and clean, no oil at all and i don't even have a catch can.
Oh, btw, did you note the throttle blade at WOT throttle, then again after the 90mm is installed? Did your 90mm TB open all the way?
Oh, btw, did you note the throttle blade at WOT throttle, then again after the 90mm is installed? Did your 90mm TB open all the way?
Jun 14, 2006 | 09:53 AM
#4
Originally Posted by LBSBLOWN
Nope my 90mm TB only opens about 75% at WOT, I also have been replying to the (go 90mm TB or go home? ) Thread on pages 4 & 5 about this issue.
oh yeah, sorry, i knew that. i think i'm losing it
Thread
Thread Starter
Forum
Replies
Last Post
nic351
Tuning, Diagnostics, Electronics, and Wiring
1
Sep 24, 2015 09:43 AM
Cha_Feel_
GM Drivetrain & Suspension
5
Sep 23, 2015 09:06 PM
Alvin@PCMofNC
Sponsor's Announcements, Sales, and Specials
0
Sep 3, 2015 06:38 AM