Attn: the Rock and all other "B" 5.3 H.O. Trucks
Jun 7, 2005 | 12:57 PM
#1
Thread Starter
Joined: Mar 1986
Posts: 18,748
Likes: 7
From: Chatsworth, CA
Attn: the Rock and all other "B" 5.3 H.O. Trucks
We have a 5.3 H.O. in house for calibration and supercharger install!! approx 15 days and we will be shipping systems!!
Get your order into a board sponsor today -------------->
Get your order into a board sponsor today -------------->
Jun 7, 2005 | 07:10 PM
#6
Question...
Originally Posted by BlownChevy
Oh yeah! All you B code guys owe 1blown04 a big thanks!
I even called GM and ranted on the demise of the 3.73's for 05 in the ecsb.
Hate To Be a Persistant PITA,
..but I am a stickler for detail.
Trending Topics
Jun 7, 2005 | 08:06 PM
#8
Thanks...
Originally Posted by BlownChevy
I will double check tomorrow.
Another Question?
I don't know much about using a Dyno and all of what kind of things can create variables in RWHP results.
Lets say you get two motors tuned to have the same crankshaft HP at simular RPMs', both in the same kind of vehicles but one has 3.42 and the other has 3.73 gears.
Are the difference in gears going to effect the amount of RWHP at a given RPM or the total output rating?
Jun 7, 2005 | 08:56 PM
#9
Thread Starter
Joined: Mar 1986
Posts: 18,748
Likes: 7
From: Chatsworth, CA
Originally Posted by therock
... I'm trying to keep a close eye on this thing because I'm going in.
Another Question?
I don't know much about using a Dyno and all of what kind of things can create variables in RWHP results.
Lets say you get two motors tuned to have the same crankshaft HP at simular RPMs', both in the same kind of vehicles but one has 3.42 and the other has 3.73 gears.
Are the difference in gears going to effect the amount of RWHP at a given RPM or the total output rating?
Another Question?
I don't know much about using a Dyno and all of what kind of things can create variables in RWHP results.
Lets say you get two motors tuned to have the same crankshaft HP at simular RPMs', both in the same kind of vehicles but one has 3.42 and the other has 3.73 gears.
Are the difference in gears going to effect the amount of RWHP at a given RPM or the total output rating?
Gears will not effect the RWHP rating.
Jun 7, 2005 | 09:03 PM
#10
12 Second Truck Club
Joined: Jan 2004
Posts: 780
Likes: 0
From: CA
Originally Posted by therock
... is I'm a bit confused. The "B" motor was only available in an 05, ECSB and "Only "3.42's" or "4.10's" were offered. Unless somthing changed or he had the 3.73's installed.
I even called GM and ranted on the demise of the 3.73's for 05 in the ecsb.
Hate To Be a Persistant PITA,
..but I am a stickler for detail.
I even called GM and ranted on the demise of the 3.73's for 05 in the ecsb.
Hate To Be a Persistant PITA,
..but I am a stickler for detail.
and you will love the radix. I installed one for a customer last weekend and, like you, he was a stickler about his truck. His 01 4X4 was very well taken care of. I spoke with him yesterday and he told me he couldn't be happier with it and has no regrets about doing it.