Looking for some bigger injectors need to show people what they look like size and type of harness
Need Bigger injectors in the truck to accomadate the amount of boost I'm running
the 8.1l injectors just don'r seem like there are going to cut it

thanks again
jim <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

 

i have 41's in my truck, i got them from http://www.rceng.com/technical.htm they cost a buttload but they were the only one's i could find. they did just bolt/plug right in. if your still looking for a pic tomorrow i will snap a pic of one of my old one's and send it to ya.

 

I can do one better than that since I have had 5 sets of injectors in the last 6 months: <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />

Here is a side by side pic of a truck injector next to a standard Bosch car injector:

<img src="http://65.216.0.146/inj2.jpg" alt=" - " />

Notice the difference in height, but also the wire harness connectors, placement of the O rings, and the tips are slightly different too. The truck injector goes down further into the intake as well.

Here is a picture of the truck injector connectors:

<img src="http://65.216.0.146/harness.jpg" alt=" - " />

<small>[ September 17, 2002, 08:18 AM: Message edited by: BigTex ]</small>