Hey guys, im apologizing in advance cause i know how much these cam threads are dreaded.

Vehicle as in sig. Its my daily driver and it does do some MILD towing, maybe a bass boat or a small utility trailer rarely. Looking for a cam, it has to be used, as i cant really justify buying a new one. This cam is for sale and i was wondering what yall think.

Its a crane cams quick lift crn-1449561
216/224 .551 .551

What lsa is this cam?
will it lope?
will zo6 springs and rods be sufficient?
any other internal parts needed?

 

LS6 springs will work, use stock size pushrods....

 

I checked Crane's website and that cam has a 115 lsa, it's the same as Vinci's "The Trucker" cam. It should work well for towing with a 6.0, but won't really lope much, especially if it's tuned right. You should definitely feel an improvement over stock with that cam

 

i was really hoping for a lope...so no lope with this cam?

 

Not really, with the cubes of a 6.0 and relatively small overlap of that cam, it should sound pretty mild...it definitely won't sound stock, but it won't rattle your A-pillars off either...

 

i dont you will hear a lope with that cam on a 115LSA

 

well then would as similar cam with 112 lsa give me more lope?

 

Yes

John

 

It actually does have a little bit of lope to it. Here's a vid of DozerDan's old truck with that cam:

http://www.youtube.com/watch?v=DnvkKxCXjVM

I like the way it sounds.

 

It does sound nice, but DD's truck is a 5.3 and TheChevyMan has a 6.0 which will swallow that cam up a bit more