4.8 cam
Mar 20, 2006 | 10:19 PM
#1
Thread Starter
On The Tree
Joined: Jan 2006
Posts: 136
Likes: 0
From: Humble, Texas
4.8 cam
I'm thinking about putting a cam in my 4.8 and i was wonderding about this cam i found. Its a 295 lift from crane with a .050 duration. I was wondering if any of you guys had any experience with this cam or one like it??
Guys in the words of Joe Dirt "Im new, I don't know what to do!!"
Help me out.
Guys in the words of Joe Dirt "Im new, I don't know what to do!!"
Help me out.
Mar 20, 2006 | 10:28 PM
#2
what are the full .050 values and the lobe separation angle? 295 lift at .050 is less than stock so..... Get back with the full specs 
Specs at .050 are like 220/220 .551/.551 112lsa.
Specs at .050 are like 220/220 .551/.551 112lsa.
Thread
Thread Starter
Forum
Replies
Last Post
Castro45
GM Engine & Exhaust Performance
24
Jul 31, 2015 07:13 PM
Suburban2500
INTERNAL ENGINE MODIFICATIONS
31
Jul 19, 2015 04:50 PM
