in the middle of pulling the radiator out and was curious if alot of at fluid will come out of the line that run into the radiator. and when i do take them out could i cover the ends with some duct tape or is that a bad idea, or what would bea better choice.

 

I didn't get much, just put a rag under the fitting when you pull it apart and it should soak up the little bit that comes out. I think if the truck has been sitting for awhile the fluid drains back into the tranny.

 

Just a tad will come ouot of the line. Just dont tip the radiator over or youll get a nice mess.