GM Drivetrain & Suspension Chassis | Transmission| Driveshaft | Gears/Rear End/Differential | Traction Aids

strange vibration under heavy accel.

Old Feb 18, 2010 | 07:47 PM
  #11  
Robertp's Avatar
Thread Starter
Staging Lane
 
Joined: Oct 2009
Posts: 62
Likes: 0
From: Severna Park MD
Default

also checked the shocks in the rear. bilstien 5100's, seem fine. is is possible the vibration is in the trans itself? its driving me nuts.
Reply
Old Feb 18, 2010 | 08:01 PM
  #12  
Robertp's Avatar
Thread Starter
Staging Lane
 
Joined: Oct 2009
Posts: 62
Likes: 0
From: Severna Park MD
Default

also it does not vibrate with the wheel soff the ground, if that helps!
Reply
Old Feb 18, 2010 | 08:09 PM
  #13  
LowBlack99's Avatar
TECH Enthusiast
iTrader: (3)
 
Joined: Mar 2005
Posts: 617
Likes: 0
From: Southaven,MS
Default

Rear axle bearing? pinion angle? Carrier bearing?
Reply
Old Feb 18, 2010 | 08:19 PM
  #14  
Robertp's Avatar
Thread Starter
Staging Lane
 
Joined: Oct 2009
Posts: 62
Likes: 0
From: Severna Park MD
Default

all seem tight. no noises from the rear end at all. fresh fluid also. pinion angle hasnt changed.
Reply
Old Feb 18, 2010 | 08:37 PM
  #15  
CODE4LS1's Avatar
TECH Apprentice
iTrader: (4)
 
Joined: May 2002
Posts: 380
Likes: 0
From: Redlands, CA
Default

Originally Posted by Robertp
all seem tight. no noises from the rear end at all. fresh fluid also. pinion angle hasnt changed.
Have you checked that flex-plate yet?
Reply
Old Feb 18, 2010 | 09:23 PM
  #16  
Robertp's Avatar
Thread Starter
Staging Lane
 
Joined: Oct 2009
Posts: 62
Likes: 0
From: Severna Park MD
Default

Originally Posted by CODE4LS1
Have you checked that flex-plate yet?
yup checked it today. no cracks in it. all the bolts were tight.
Reply
Old Feb 18, 2010 | 09:34 PM
  #17  
CODE4LS1's Avatar
TECH Apprentice
iTrader: (4)
 
Joined: May 2002
Posts: 380
Likes: 0
From: Redlands, CA
Default

Man.....I had money riding on that....
Reply
Old Feb 18, 2010 | 09:37 PM
  #18  
Robertp's Avatar
Thread Starter
Staging Lane
 
Joined: Oct 2009
Posts: 62
Likes: 0
From: Severna Park MD
Default

im just hoping to find it soon it driving me nuts!!!! not so much the one at take off under hard accel. but the one at 52-55 mph on or off the throttle is really getting to me. dont get me wrong i want them both gone though.
Reply
Old Feb 18, 2010 | 09:39 PM
  #19  
Coban's Avatar
TECH Addict
iTrader: (14)
 
Joined: Mar 2005
Posts: 2,130
Likes: 0
From: League City, TX
Default

Greased the slip yoke yet?

https://www.performancetrucks.net/fo...ighlight=clunk

Do a search for "clunk" in this section
Reply
Old Feb 18, 2010 | 09:44 PM
  #20  
Robertp's Avatar
Thread Starter
Staging Lane
 
Joined: Oct 2009
Posts: 62
Likes: 0
From: Severna Park MD
Default

will do that tomorrow!!!
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:55 PM.