Post Your Low/Dropped Single Cabs!
#22
Launching!
Thread Starter
Gbrown1320 dam your truck is clean AF!!!!!!! Major props man! What is your suspension setup if you don't mind me asking? Tire specs and any other mods you may want to fill us in on lol!!
#23
Staging Lane
iTrader: (6)
It's got 215/65r17 front tires and 295/65r15 MT ET Street SS Radials out back. The front brakes have been converted to the 13inch front option off a later model truck and the rears are the 1320wheels 15in conversion.
The truck has a cammed 6.0L with plenty of bolt ons. Running through a performabuilt stage II 4L60e with an FTI 3200 stall converter, Custom built 4in DSS aluminum driveshaft with 1330 yokes, and motive 4.56 gear set on a Yukon duragrip LSD with a TA girdle on the 10 bolt.
Thats the short list.. lol.
The following 2 users liked this post by Gbrown1320:
5speed4.gr8 (09-23-2021),
hlpressley (06-25-2019)
#24
Launching!
Thread Starter
Thanks man. The truck is 5/6.5 on 2in drop spindles and stock coils that have been cut. The rear is c notched, with a DJM flip kit. The front of the leaf pack is clamped to the overload leaf to stiffen the pack and hit the tires harder. Every bushing on the truck has been replaced with energy suspension poly urethane.
It's got 215/65r17 front tires and 295/65r15 MT ET Street SS Radials out back. The front brakes have been converted to the 13inch front option off a later model truck and the rears are the 1320wheels 15in conversion.
The truck has a cammed 6.0L with plenty of bolt ons. Running through a performabuilt stage II 4L60e with an FTI 3200 stall converter, Custom built 4in DSS aluminum driveshaft with 1330 yokes, and motive 4.56 gear set on a Yukon duragrip LSD with a TA girdle on the 10 bolt.
Thats the short list.. lol.
It's got 215/65r17 front tires and 295/65r15 MT ET Street SS Radials out back. The front brakes have been converted to the 13inch front option off a later model truck and the rears are the 1320wheels 15in conversion.
The truck has a cammed 6.0L with plenty of bolt ons. Running through a performabuilt stage II 4L60e with an FTI 3200 stall converter, Custom built 4in DSS aluminum driveshaft with 1330 yokes, and motive 4.56 gear set on a Yukon duragrip LSD with a TA girdle on the 10 bolt.
Thats the short list.. lol.
#26
Launching!
Thread Starter