Need help.... wiring harness problem
#1
TECH Senior Member
Thread Starter
iTrader: (10)
Join Date: Oct 2004
Location: Crystal Springs, MS
Posts: 14,068
Likes: 0
Received 2 Likes
on
2 Posts
Need help.... wiring harness problem
Well i had pulled my transmission out about 2weeks ago, and i left my truck in the shop behind the house.
All the wires and hoses were just hanging under the truck and my room mates stupid dog got under there and chewed one of my Transmission lines (Pushloc hose, $35) and got ahold to some wires also.
Well i got the Transmission lines fixed, just went and bought 6' of -6AN Pushloc hose today.
Next problem is all the wires and connectors that are messed up.
Which include the 2 connectors that go to the black box on the Driver side of the trans, its for the Gear selector box thingy. If i can find just the connectors with bout 12" of wire that would work perfectly!!
Dog chewed up the rear O2 sensor wire also,,,, but who needs that anyway??
I know i can rig it enough to drive it this weekend but i want to get a good connector and wires so i can solder them all back together, and the big connector is kindof damaged, i think i can fix that with a small screwdriver? We will see.
If anyone can find what im looking for i would appreciate it!!!!!
Im tryin to find some phone numbers to local junkyards right now.. but just incase...
Thanks alot guys!!!!!!
All the wires and hoses were just hanging under the truck and my room mates stupid dog got under there and chewed one of my Transmission lines (Pushloc hose, $35) and got ahold to some wires also.
Well i got the Transmission lines fixed, just went and bought 6' of -6AN Pushloc hose today.
Next problem is all the wires and connectors that are messed up.
Which include the 2 connectors that go to the black box on the Driver side of the trans, its for the Gear selector box thingy. If i can find just the connectors with bout 12" of wire that would work perfectly!!
Dog chewed up the rear O2 sensor wire also,,,, but who needs that anyway??
I know i can rig it enough to drive it this weekend but i want to get a good connector and wires so i can solder them all back together, and the big connector is kindof damaged, i think i can fix that with a small screwdriver? We will see.
If anyone can find what im looking for i would appreciate it!!!!!
Im tryin to find some phone numbers to local junkyards right now.. but just incase...
Thanks alot guys!!!!!!
Thread
Thread Starter
Forum
Replies
Last Post
D1SCSS
GM Parts Classifieds
44
01-25-2016 10:14 PM
TimDave217
GM Parts Classifieds
3
08-24-2015 04:38 PM
smokeshow
Tuning, Diagnostics, Electronics, and Wiring
2
08-23-2015 08:23 PM