I recently dropped my 2004 Tahoe 3" in the rear (did a 2"/3" drop with spindles and springs) and now the LCAs are pointed down hill (higher on the axle than on the frame. Does anyone make LCA relocation brackets to drop the axle in of the LCA so that it is either flat or up-hill?

Thanks,
Chris

 

Not that I am aware of but a fab shop could do it fairly easy

 

I dont recall my McGaughys spindles needing LCA, what type of Spindles did you go with ? Im on a 3/5 Drop. With stock LCA

 

I believe he's talking about the rear suspension.

 

Hmmm... I would have thought someone out there made a set of LCA brackets for Tahoes. Guess I know what I'll be making one weekend.

 

They Do, here you go

Suburban Rear Lower Control Arms | Tahoe Rear Lower Control Arms

and here is an adjustable one
http://www.spohn.net/shop/2000-2006-...Hummer-H2.html

 

Not LCAs, LCA BRACKETS

https://ls1tech.com/forums/suspensio...ed-w-pics.html