I realize that...I want the older one for the smaller rotors...05+ have bigger rotors

 

why smaller rotors? I'm pretty sure the calipers are different also right? I sent my hubs to Moser and you can do the same for rotors, go to their site and go under Shop Services

 

Because I want to run smaller than a 17" wheel! I want to run some welds or somethin like that

 

What would be wrong with getting some rotors from an f-body?

 

Or an s-10?

 

just have to check the offset, may be able to space out you calipers, then again, may be custom brackets as well for the smaller diameter. I'd just run 17's up front and 15's out back for the track and 17s or bigger all around on the street. It's what I'm planning, just not going 5 lug. 99-04 rotors with 99-04 calipers redrilled to 5 lug should wok for 16s though I would think.

 

Then get the calipers and rotors, I'm not sure about fbody/s10 rotors, everything is different for offsets etc. so I would just stick with silverado parts.