GM Drivetrain & Suspension Chassis | Transmission| Driveshaft | Gears/Rear End/Differential | Traction Aids

Guys with front coil overs come in!!!

Old Sep 11, 2013 | 11:13 AM
  #1  
brandon6.0's Avatar
Thread Starter
TECH Resident
iTrader: (26)
 
Joined: Dec 2009
Posts: 937
Likes: 8
From: Glennville GA
Default Guys with front coil overs come in!!!

Hey guys how would u rate your front coil overs compared to your before front suspension? Better track times? Better traction on street? Please post up thanks.

What about ride height? My truck sits at 5/7. Would love to keep it around that front drop. This is via 3" drop coils and spindles. Thoughts?
Reply
Old Sep 13, 2013 | 09:50 AM
  #2  
brandon6.0's Avatar
Thread Starter
TECH Resident
iTrader: (26)
 
Joined: Dec 2009
Posts: 937
Likes: 8
From: Glennville GA
Default

Nothing?
Reply
Old Sep 13, 2013 | 10:16 AM
  #3  
BigDaddy0381's Avatar
TECH Enthusiast
iTrader: (7)
 
Joined: Nov 2011
Posts: 507
Likes: 0
From: Douglasville, Ga
Default

From what I have heard and read it is the shiznit... Its on my "mods to do" list...
Reply
Old Sep 15, 2013 | 07:30 PM
  #4  
brandon6.0's Avatar
Thread Starter
TECH Resident
iTrader: (26)
 
Joined: Dec 2009
Posts: 937
Likes: 8
From: Glennville GA
Default

Well guess this was a dead thread.
Reply
Old Sep 15, 2013 | 07:54 PM
  #5  
skeet's Avatar
TECH Junkie
iTrader: (18)
 
Joined: Feb 2007
Posts: 3,157
Likes: 2
From: P.A. TX
Default

i run the ridetech 24-27 adjustables with modified ridetech lower control arms, as for better track times ? i'll say this better ride down the track, i do have mine set to hold up the front alittle longer for weight transfer on launch, its a costly mod but yeah i personally think it helped my ET but how much i couldnt say, so much other stuff got changed. last 2 track outings i cut a 1.40-1.41 60 ft on motor. then lost the 60E during the week. took me a good while to adjust front and rear to find the sweet spot.
Reply
Old Sep 15, 2013 | 10:08 PM
  #6  
brandon6.0's Avatar
Thread Starter
TECH Resident
iTrader: (26)
 
Joined: Dec 2009
Posts: 937
Likes: 8
From: Glennville GA
Default

Thanks for the reply. Figured while i was at it with doing rear setup might as well tackle the front to. Anyone else?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
signguy62
GM Drivetrain & Suspension
17
Sep 20, 2015 02:05 PM
GM1697
WTB (Wanted To Buy)
11
Sep 11, 2015 10:19 PM
fillpot
Tuning, Diagnostics, Electronics, and Wiring
2
Jul 26, 2015 07:21 PM
lxcoupe
FORCED INDUCTION
8
Jul 21, 2015 02:12 AM
GM-only
GM Drivetrain & Suspension
3
Jul 19, 2015 10:48 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:34 PM.