Competition Engineering Slide-A-Link
#1
Competition Engineering Slide-A-Link
http://www.competitionengineering.co...w_products.asp
- Offers the adjustability of a 4-link, allowing you to tune for better 60-foot times
- Unlike rigid bars, the adjustable link makes on-car pinion angle and preload changes quick and easy
- Mounts to factory locations. No welding required
- Special durometer urethane bushing stores energy for more consistent E.T.'s
#2
TECH Senior Member
iTrader: (9)
Join Date: Aug 2003
Location: Cleveland Mississippi
Posts: 6,204
Likes: 0
Received 0 Likes
on
0 Posts
Interesting product...good find. So this is basically what... traction bars with preload adjustment capabilities kinda similar to the caltracs? Or is this an totally different setup altogether? Might be worth taking a look at.
#3
14 Second Truck Club
iTrader: (31)
Very similar to the cal-tracs. I used them before, and they work great. They are the exact same as the Moroso version, which is all the same company. These are a slight improvement over the Cal-tracs. They keep the axle from wraping up and the spring from wraping. When you apply power and the housing tries to turn the bars apply pressure to the top of the spring at the front.
#4
TECH Senior Member
iTrader: (9)
Join Date: Aug 2003
Location: Cleveland Mississippi
Posts: 6,204
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mzoomora
Very similar to the cal-tracs. I used them before, and they work great. They are the exact same as the Moroso version, which is all the same company. These are a slight improvement over the Cal-tracs. They keep the axle from wraping up and the spring from wraping. When you apply power and the housing tries to turn the bars apply pressure to the top of the spring at the front.
Trending Topics
#9
TECH Fanatic
Join Date: Dec 2004
Location: Tucson AZ
Posts: 1,099
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by slowprocess
Thanks for the info. Now if I can just get a price on these suckers...
https://ls1tech.com/forums/showthrea...3&page=1&pp=20
#10
TECH Senior Member
iTrader: (9)
Join Date: Aug 2003
Location: Cleveland Mississippi
Posts: 6,204
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by desTRUCKtive
Hey SLOW did you read the thread that says Traction Traction!!! H777 & Sierrasport recomended clamping the leaf spring together for helping on the leaf spring wraping. I put them on the other day and all I have to same is damn. Went over a couple of railroad tracks spinning tires and the thing did not want to hop. I know that some of you guys have a lot more power than I do so maybe something like above might help better. But I bought the clamps at Autozone for 10bucks... and for 10bucks it is worth it.
https://ls1tech.com/forums/showthrea...3&page=1&pp=20
https://ls1tech.com/forums/showthrea...3&page=1&pp=20