walledition

iTrader: (3)

60F time

TXsilverado

iTrader: (19)

good luck. i would guess each time you throw a lot more power at the launch, you may need to tighten that shock a little. dont take my advice as gospel. give the truck what it wants.

walledition

iTrader: (3)

Thank you for your advise

fastjweb

iTrader: (2)

From what I can see, your really should just have them touching the leaf when you are up on the converter, and boost built. Sounds like a pain in the ***, and need to have someone ready to adjust the bar lol. Mine are angled up towards the front, and they are backed off like 4 full turns and cut a best of 1.54 60s. I figured by backing them off a bit I wouldn't be preloading the **** out of it when I stage.

walledition

iTrader: (3)

Last time at the track

17psi in the tires
two step at 2800rpm (4.4psi) of boost
60 feet 1.77

wretched73

iTrader: (1)

Looks good, Right around 4-5 seconds it looks like you unload the tires and spin a little.

TXsilverado

iTrader: (19)

looks like a hook to me. give it more power.

walledition

iTrader: (3)

I tried 3000rpm and it hooked
then 3200rpm and its started spinning, didnt go up in smoke put it spun (no videos of does runs :s)

i guess thats what the track will take wirg radials??

madmann26

iTrader: (7)

How long are you heating your tires up? Have you tried a little more time vs a little less time vs a dust off? What is your air pressure?

walledition

iTrader: (3)

Ive tried everything from no burnout to long burnouts but usually this is what i do:
ive tried 12psi to 18psi in the tires