I know the rear ones are, but I'm not 100% sure on the fronts. I need to shoot Eric an email anyway, so I'll ask...follow-up soon.

 

Appreciated! PM me if you can help me out!

Thanks

 

I took mine completely off the front.

 

i am gona take the ones that came with the cnotch and put those in the frount and take the frount ones and put them on the back......when yal did your cnotch how did yal cut the frame...sawzaw or torch!

 

Direct from the friendly folk @ Belltech:

p/n 4922 is a 1.26" foam bump stop that will fit in the front control arm to replace the taller factory bump stop.

p/n 4923 is a 2" tall foam bump stop for the rear.

I hope that helps...

 

Sweet, who is carrying these or can I order direct?

 

Figures you'd hit on the one question I forgot to ask. They've got an excellent reseller down in the Fresno area - let me get the contact info.

 

Thanks for the info Jerry.
Looks like my next mods are going to be some new bumpstops front and rear and 4 new Street Performer shocks!

 

i used metabo blades (cutting disc for a grinder)

 

When you get them let me know how you like them. I may order a set too.