Belltech 2" lowering shackle only 1.5"
#1
TECH Fanatic
Thread Starter
iTrader: (4)
Join Date: Jun 2003
Location: Chicago Burbs
Posts: 1,528
Likes: 0
Received 0 Likes
on
0 Posts
Belltech 2" lowering shackle only 1.5"
I compared the belltech 2" shackle to the stock shackle and it's mouting point is 3" higher than the stock shackle. So this means that it moves the end of the leaf three inches up. The axle is within 2" of being in the center of the leaf spring span, so it pulls the axle into the body 1.5".
Sure enough after I install and take it for a drive. It gave me a 1.5" drop. Shouldn't the 2" drop shackle have the mounting points 4" higher than the stock shackle for a true 2" drop? I mean I'm not sweating it, just something I noticed.
Andrew
Sure enough after I install and take it for a drive. It gave me a 1.5" drop. Shouldn't the 2" drop shackle have the mounting points 4" higher than the stock shackle for a true 2" drop? I mean I'm not sweating it, just something I noticed.
Andrew
Thread
Thread Starter
Forum
Replies
Last Post