I did a Belltech spindle 2in drop in the front and 2in shackles in the back. I have Supercharged06SS (Robbie) rims, which are 22x8.5 up front and 22x10 in back. So i took it to Firestone acouple of weeks ago and had the alignment done. I look at the rims and the passenger side sticks out pass the fender. I go and look at the drivers side and its tucked in. S I starts wondering WTF is this. I look at the arm adjustment cambers and the passenger side it almost maxed out, making the top of the tire stick out. I go and look at the drivers side and they didnt even touch it. This was last couple of weeks. The next day I decided tolook at the truck on how its been setting in with the new suspension stuff and i measure and the front is to high so I let the front down some via the torsion keys. Today I take it back to have it re-checked since I messed with the torsion keys and it was off on one side. They fixed it and i had forgotten about the tire sticking out issue so I went home. When i get home I dawned on me about that so I check it and still the same. The guy should me the specs and everthing was with in range. Whats going on? Can it be the spindles? Need advice.