BURNRBR

I haven't yet tested my duty cycle still trying to fix the hack job installation by previous owner. Whether I need new injectors or not, I am trying to find injectors around the 40-50 range. I have looked through the forms and I know I am overlooking what I need.

The motor does have the truck intake and rails. Stock bottom end with a comp cam 54-444-11 cam. Motor runs good but recent reading says the stock injectors could be holding it back. Like I said I haven't looked at the current duty cycle I am just wanting to know what injectors fit

My buddy has a shiny turbo that he keeps offering me, one of these days I'm gonna buy it. On that day I don't want to have to start looking for new injectors, trying to plan ahead here.

Thanks for your help.

Mangled03gmc

iTrader: (95)

Only next step is a set of 42lb injectors, which your not going to get for under 150 if your lucky. They still sell for about the 200 mark.

BURNRBR

I should have made it more clear, I was trying to say I want 40 to 50 lb/hr injectors. I know I will have to pay to get quality injectors. It would be nice to pay 50$ a piece but that's not gonna happen.

My big concern is finding the right height injectors or getting the correct adapters to make them fit the truck rails. I am ok with changing connectors I just need help finding injectors that will work.

Mangled03gmc

iTrader: (95)

The delphi marine injectors either the 42 or 44'lb ones will fit the truck rails, same height and all, plug and play.

BURNRBR

thanks, that's exactly what I was wanting to know. you made this so simple.

swift700

iTrader: (3)

I have a set of direct fit 60lb injectors if you are interested. They are from 5-0 motorsports. They are not too big for your setup and allow room to grow.