Converting to flex fuel
01-31-2017, 09:03 AM
#1
Converting to flex fuel
Maybe there is already a thread, if so I missed it. Just looking to start gathering info on what's needed on the tune /OS side to get a flex fuel sensor to work in my 04'
E85 is not that common around me but there is a station about 20m away so I want to be able to run a mix. Will most likely not be running any more then 50/50 mix but due to its availability and me letting the truck sit a lot I want to be able to switch back and forth without a big PITA.
Thoughts?
E85 is not that common around me but there is a station about 20m away so I want to be able to run a mix. Will most likely not be running any more then 50/50 mix but due to its availability and me letting the truck sit a lot I want to be able to switch back and forth without a big PITA.
Thoughts?
01-31-2017, 12:24 PM
#2
i think i made a thread about this asking this same exact question and got really good responses. ill see if i can find it for you....
here ya go https://www.performancetrucks.net/fo...stions-544625/
here ya go https://www.performancetrucks.net/fo...stions-544625/
The following users liked this post:
03sierraslt (01-31-2017)