decided to do a few small mods to help get the Frontier sitting right.

SoCal Goat and I are going to tackle the project this Monday.
Going with a 2/3 drop....ultimately, with some nice 31.5" 40 series tires that should set a nice stance for it.

Going to check and record my driveline angles this weekend just in case I need to duplicate them post modification.

pics and measurements to follow

 

Sounds good! Let's see those pitures when you get 'em!

 

****, speaking of pictures, I don't even know where my camera is

need to get this oil filter changed out and then get these swirl marks the detailers left in my paint out *******

 

I have no clue how your dropping the rear, taking out a leaf is ok but the springs are already sagging...

 

be sure to do some before and after pics. is this a 2wd truck.

 

Uh...
We're going to ATTEMPT it.
It should be fun.

 

got some before measurements done today; took readings from the ground(center of wheel) to the wheel arch:

Drivers Front: 34"
Pass Front: 34 1/16"
Drivers Rear: 35 5/16"
Pass Rear: 35 1/16"

 

Measurements dont tell me anything, wheres the pics!?

 

those are my before numbers, I will be sure to post before & after pics when complete

 

Oh sorry, did a little speed reading and failed