Ford Engine & Exhaust Performance All EFI, 4.6, 5.4 Triton

i want 14's

Old Jul 22, 2005 | 11:20 AM
  #1  
rdhemi345's Avatar
Thread Starter
On The Tree
 
Joined: Jul 2005
Posts: 127
Likes: 0
Default i want 14's

I know it will take some work but i have a 99 ford f150 5speed with a 4.6 and i want to break fourteens all motor. I plan on spraying later on but not until i break fourteens. Not too many people have done it but i want to be one of them. There is a guy on f150 online that has a 4.6 5speed and run 14.8's. I plan on most bolt ons and an excalibur2 tune and maybe heads and a cam but not quite sure just needing a little advice
Reply
Old Jul 22, 2005 | 02:41 PM
  #2  
GREGGO's Avatar
TECH Senior Member
iTrader: (2)
 
Joined: Dec 2001
Posts: 9,101
Likes: 0
From: League City, Texas
Default

Have you considered a motor swap to larger cubes? This is same concept the the GM4.8's have. While the r/c can do it, the e/c have a hard time. I have accompliched 14.97 on motor, but that wass all the boltons, a 3400 stall converter and a lot of wieght reduction. As for your 5 speed, a lot would depend on how you shift. Also some sticky tires.
Reply
Old Jul 22, 2005 | 03:17 PM
  #3  
one03sierra's Avatar
Formerly one92rs
iTrader: (1)
 
Joined: Apr 2003
Posts: 4,205
Likes: 1
From: league city texas
Talking

they offer a lot of accessories for these fords that can help. what does it run now. what mods does it have. i do know there is a white one at the track here in baytown that is a 4.6 with the spray and that sucker runs 14's. i think it is actually a little quicker now.
Reply
Old Jul 23, 2005 | 12:56 AM
  #4  
99mach150's Avatar
Teching In
 
Joined: Jul 2005
Posts: 4
Likes: 0
Default

my truck runs 16.6s right now and that is bone stock with an open rear end. plan to start modding very soon. putting headers, exhaust, and limited slip in the next few weeks. ill see where its at hopefully in the fifteens
Reply
Old Jul 23, 2005 | 06:40 AM
  #5  
one03sierra's Avatar
Formerly one92rs
iTrader: (1)
 
Joined: Apr 2003
Posts: 4,205
Likes: 1
From: league city texas
Talking

Originally Posted by 99mach150
my truck runs 16.6s right now and that is bone stock with an open rear end. plan to start modding very soon. putting headers, exhaust, and limited slip in the next few weeks. ill see where its at hopefully in the fifteens
hey buddy welcome aboard. is your truck and extended cab or a reg cab? good luck on the mods and keep us informed.
Reply
Old Jul 23, 2005 | 01:54 PM
  #6  
99mach150's Avatar
Teching In
 
Joined: Jul 2005
Posts: 4
Likes: 0
Default

The truck is a reg. cab. The 16.6's were with major traction issues, so with just some sticky tires and a limited slip my times should drop alot. I will keep everyone updated on my progress!
Reply
Old Jul 24, 2005 | 08:05 PM
  #7  
litreddevil's Avatar
Banned
iTrader: (4)
 
Joined: Oct 2003
Posts: 5,151
Likes: 1
From: From Houma La. Living n Ellisville Miss.
Default

they have a few guys that we tuned that are running 14.60s all motor x-cab
Reply
Old Jul 24, 2005 | 09:33 PM
  #8  
99mach150's Avatar
Teching In
 
Joined: Jul 2005
Posts: 4
Likes: 0
Default

litred, Ford 4.6's??? Could you tell me more about their mods....
Reply
Old Aug 18, 2005 | 05:44 PM
  #9  
carlos_dado's Avatar
Teching In
 
Joined: Aug 2005
Posts: 7
Likes: 0
Default

hey whats the best chip for a ford 5.4
Reply
Old Aug 18, 2005 | 05:49 PM
  #10  
carlos_dado's Avatar
Teching In
 
Joined: Aug 2005
Posts: 7
Likes: 0
Default

i have a ford king ranch 5.4. I raced this other ford with a 5.4 and left him like a truck behind. Today i raced some 4.6 that had some mufflers, a k&n intake, and it was a extended cab. My truck is a supercrew is plain stock and i beat him of the launch and was leaving him beahind nasty. Is that how al 4.6 are or did that one had something wrong with it.
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:28 PM.