I have a standard issue 7 x 24 cooler and would like to go larger for the GA hot summers.
Whats out there or has been done for the likes of an 05 Silverado?

 

I was thinking the same thing.

 

I'm googling. what about this?

Is it too much to put in front of the radiator affecting the AC or enging cooling.

In this LIST
there are some near the OE same size but thicker.

Which would be the best?

 

Don't most radix guys use the CTS-V heat exchanger offered by magnacharger?....

Look in this FS posting for an example:
https://www.performancetrucks.net/fo...ight=exchanger

 

i think the cts V exchanger is only 14x24. you could get another stock size or a little bigger exchanger and run them in series.

 

Thanks Coban,

I wonder how the dual setup goes in?
Did he use them both at the same time?
The larger one looks like enough improvement alone.
So there is hope. I hope to see some install pics.
I guess I'll be calling Maggie to hear them out too.

 

i ran twin 7x 24s with my 112 6.0 and made good power...489 to the tires.

now with my 1900....i am using an 18x24 from the NNBS kit. power tbd on friday!

 

What kind of money for the 7 x 24?

 

You can get an radiator and just mount it under the truck with some fans. You can go as wide as the frame rails.

 

Your a pokin at me cause I didn't get a wide band from ya huh?