PerformanceTrucks.net Forums

PerformanceTrucks.net Forums (https://www.performancetrucks.net/forums/)
-   FORCED INDUCTION (https://www.performancetrucks.net/forums/forced-induction-159/)
-   -   Post your Timing and PSI (https://www.performancetrucks.net/forums/forced-induction-159/post-your-timing-psi-519274/)

TRD_Tundra Jun 24, 2013 10:32 PM

Post your Timing and PSI
 
Want to see what everyone else is running.
2006 Silverado 76mm front mount Stock 5.3, cam, head studs, ls9 head gaskets, 4" intercooler.

I'm at 13.5* timing at 11-12psi w/ 93 octane and single nozzle straight meth.

GMCtrk Jun 24, 2013 10:38 PM

14.5* on 10 psi. Straight e85. Tune is super conservative but I'm out of fuel pump with any more boost.

Ferocity02 Jun 24, 2013 11:28 PM

Currently 9.5psi, ~13deg timing, 11 AFR, 91 octane and no meth. Going to water/meth soon.

AndysC3 Jun 24, 2013 11:36 PM

I ran my 12.02 with 11psi, 20* and 91 and 3gal of e85 added to the tank and 100% meth

Blown06 Jun 25, 2013 12:00 AM

I had this discussion with casey a lot back in the day......20/20 is the shit

ak2007r6 Jun 25, 2013 12:55 AM

To much / To Much / No Meth

https://dl.dropboxusercontent.com/u/...%2010%20PM.jpg

gonzo 6.2 Jun 25, 2013 01:46 AM

8lbs 16*

tim wellington Jun 25, 2013 06:54 AM

psi and timing
 
running 8lbs 18.deg 10.8 a/f . dont know if its right .starting to buck like a bull under load over 4000rpm i was going start a post like this morning .any of yall had this problem it may be in tune tried air flow meter and aero 340

UnVmy5.3 Jun 25, 2013 07:25 AM

10lbs 17 degrees no meth stock 5.3

sprayedenali Jun 25, 2013 07:45 AM


Originally Posted by ak2007r6 (Post 5117964)

LOL!!

Like Travis said, 20/20 is where you all need to be! Haha. Don't be afraid to throw some timing at these things. Thats what knock sensors are for, right? Haha


All times are GMT -5. The time now is 12:09 AM.


© 2026 MH Sub I, LLC dba Internet Brands