here is mine,

 

Have you tried even putting your grill back on yet? Looks like your gonna have a LOT of trimming to do just to put in on. If you cut a lot off the back of the head lights bracket, you might be able to just fit piping though there. Nothing easy about putting a grill up there on the older trucks. There is a reason we put 27" intercoolers between the frame rails on 99-02 trucks.

 

How thick is your core? I'm amazed you squeezed it behind the a-frame support there.

 

you have any pictures

 

Mikegyver that is beautiful. Good job!!!

 

Not of an upper grill mount. I've never done one up there. Mine are all in the lower bumper.

 

Sell that big *** IC and get the next size smaller, it goes right in the rails with out any cutting, should be good enough to support a bit of HP.

 

...or get a smaller radiator.
I'm considering going that route... have a 34" rad, but really want to run an IC behind grill with the shortest routing possible.

 

im gonna keep it the way ive got it now i figured out how to run the piping i just gotta cut up the headlight mounts some nothing serious and ill mount my trans cooler behind the bumper
thats the reason i wont the intercooler behind the grille least amount of piping

 

Nice, be sure to snap some photos of what you cut!