FYI, NEW Billet TRUCK 90mm Throttle Body is coming!
#43
TECH Fanatic
iTrader: (28)
Join Date: Mar 2002
Location: waynesburg, KY.
Posts: 1,384
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by thunder550
For anyone who is interested, Nick Williams already make a 90mm cable throttle body that work on the trucks.
#44
Moderator
Thread Starter
iTrader: (14)
Join Date: Mar 2003
Location: Chandler, AZ
Posts: 2,327
Likes: 0
Received 0 Likes
on
0 Posts
I talked with Nick this morning. There has been a setback in the project due to inability to get CNC machine time. This project is first up on Nicks list when he gets caught up. We are looking at mid March now. Business conditions were not like what they are now when Nick took this project on. My apologies guys... I was hoping to have a throttle body by now too
#45
what a rush!
iTrader: (8)
Originally Posted by Bill Reid
I talked with Nick this morning. There has been a setback in the project due to inability to get CNC machine time. This project is first up on Nicks list when he gets caught up. We are looking at mid March now. Business conditions were not like what they are now when Nick took this project on. My apologies guys... I was hoping to have a throttle body by now too
#47
TECH Apprentice
Join Date: Jan 2005
Location: Woburn, Mass.
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
My truck could def benifit from this as it is only breathing through a stock ported 78mm tb. I was going to retrofit an ls2 tb to it and weld an adaptor to the stock intake and run the new harness and TAC module, but if I can buy a 90mm billet tb with a 3 bolt flange and port match my intake that would be key.
Alex
Alex
#50
Moderator
Thread Starter
iTrader: (14)
Join Date: Mar 2003
Location: Chandler, AZ
Posts: 2,327
Likes: 0
Received 0 Likes
on
0 Posts
None yet guys. Sorry... I've been holding off calling Nick until he had his new equipment up and running... which was due at the end of last month. I figured a couple extra weeks to get the equipment setup, bugs worked out, etc. I will call him tomorrow...
Bill
Bill