Denali 6.2l D1SC
May 3, 2018 | 10:48 AM
#1
Thread Starter
TECH Fanatic
iTrader: (40)
Joined: Sep 2005
Posts: 1,458
Likes: 0
From: North Fort Worth
Denali 6.2l D1SC
So I am new to the procharger world. Got my 08 denali up and running a couple days ago. Have a 4.38" pulley and stock crank balancer with the D1SC. Only spinning to 5.5k but I am only seeing barely 5lbs. Does this seem right? I have an ebay front mount 27x8x3.5" core and 3" in and out. Was wondering if that was that big of a restriction?
I have a LSA map installed and the correct offsets programed from when I was running an LSA blower on my Tahoe. I am also at 102% duty on the 50lb flex fuel injectors that I thought would get me a little farther on 93 than 5lbs. Thanks in advance guys.
I have a LSA map installed and the correct offsets programed from when I was running an LSA blower on my Tahoe. I am also at 102% duty on the 50lb flex fuel injectors that I thought would get me a little farther on 93 than 5lbs. Thanks in advance guys.
Thread
Thread Starter
Forum
Replies
Last Post
