I have yet to drive my truck with the snow kit but the controller is also progressive...it may be junk? Time will tell.

 

Nice^^I'm not surprised others have followed suit on the progressive ability.

 

No one I have talked to about the alky kit can tell my why their controller is so much better than others.. Yea I understand their controller is progressive but so are many others out there. Can someone enlighten me here?

 

The difference is the alky kit's controller can adjust the agressiveness of the progression. All other kits ramp up at the same rate. The alky kit can adjust the curve.

The pump on the alky kit is better. It has been upgraded with better seals that can handle 100% meth.

 

See that makes me think tuning would be easier with a linear progression. Not sure why you wouldn't want a linear progression with a start and stop point. My AEM controller turns on the pump at 10% duty cycle where I set the start position to and then linearly ramps up to 100% where I set my Full position. Why is that not ideal compared to your alky?

The new devils own, alcohol injection, AEM, ect. pumps are rated for 100% as well. They are all the same pump with different labels on them.

 

Some don't claim 100% meth for the CYA clause.

We sale the devil own hadn't had anyone call me back with an issue.

 

Everyone claims Alky Control is the best but I cant say first hand as all I have used is the Devils Own Kits and its a killer setup for the price. Used one in my 4 cylinder turbo setup with no issues (dual nozzle) and then sold that setup. Recently picked up another kit and will use it without hesitation.

 

Julio builds his own pumps . The quality of materials alone in the alky kits are 2nd to none , no plastic tubing , stainless braided hoses and like said the only kit out there pump and material wise that is rated to handle 100% meth . There's a reason all the big dogs run Alky , and not just in our little truck community

 

What does an alky kit run for price

 

I don't do meth injection anymore as I run e85, but would like to see someone do a kit running off of boost. I know people have done it with success. You need a sealed tank to hold the meth, a line running to the top of the tank with power adder boost, and a line off the bottom of the tank running to the intake system pre power adder with your nozzle. It is very simple and no pump to fail. It progressively increases as boost increases. If I were to stay with my old supercharger I would have tried this route. Just something to think about.