8.1l whippled WONT START rebuilt motor
#22
TECH Apprentice
Thread Starter
Join Date: Apr 2012
Location: thurmont, maryland
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts
OMFG wasnt expecting the call from the machine shop today saying "well we cleaned the heads and well your not gonna belive it but". yes what am i not gonna belive "They are both cracked all the way to the combustion chamber". SON OF A......... bought those heads 2 years ago so i cant even go after the person who sold them to me
#25
TECH Apprentice
Thread Starter
Join Date: Apr 2012
Location: thurmont, maryland
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts
stock heads. had bought the set for 400 as a spare set. they were clean and mine were well nasty so i wanted to use them. oh well machine shop is gonna clean my old ones up
#28
TECH Apprentice
Thread Starter
Join Date: Apr 2012
Location: thurmont, maryland
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts
so lets see.. got the heads from the machine shop and installed.. now there is no spark on any cylinder??? i have a hand held programer that i can see im getting 90-130 rpms while cranking, 5 degree of advance on my timing, and i know i my temp sensor is reading 80 degrees also. fuel injectors are all working just no spark??? im lost
#29
TECH Apprentice
Thread Starter
Join Date: Apr 2012
Location: thurmont, maryland
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts
wow wow really i hate GM... there was ONE blue ground wire by the front right side of the block not attached that stopped it from sparking.. wtf no codes ever went off