Byrdman11

iTrader: (1)

Sorry about the gauge not showing up on the drag test. But it set to 8lb.

Byrdman11

iTrader: (1)

Finished up the last 4 pistons and rings Check deck height and it's .002 out. All is good.

Byrdman11

iTrader: (1)

Engine going great rod bolts stretched. Pistons are in and Heads are needing cut to drop 3cc .

03tahoe80

I have a03 Chevy Tahoe and want a ls3 longblock turbo charged do you think it will fit and what should I look out for if no 6.3 6.2 it will be a 5.5 ls3 out of the new c5 corvette power that I want is 675 hp and 655 tq what's your thoughts

Byrdman11

iTrader: (1)

A 6.2 will fit and making power with a turbo kit is easy. First you will need some good pistons and rod to be safe at 650rwhp, stock heads are ok, small cam and a trick turbo kit.

oakley6575

iTrader: (5)

Shouldn't you measure the deck height on the tallest part of the piston instead of inside the dish?

Byrdman11

iTrader: (1)

I did check it top and bottom. I was just showing the reading of the center with the dish subtracted.

Byrdman11

iTrader: (1)

Degreed the cam tonight and finishing up the short block tomorrow. Also got my powder coated timing cover and valve cover.

Byrdman11

iTrader: (1)

Finished up the short block. Starting on the heads. I set the heads and valve covers up on the block for a few pics. Sorry pics suck but some to show my work.

franko98

This is gonna be sick