ohh lol... i just searched through yahoo. first site i saW!

 

I decided to go with the TC76 or 78 BB

 

So what rod and pistons you go with??

 

stock for now!! just gonna throw some meth in the mix and run about 15psi

 

So you went forged pistons in there and stock rods??

 

I think he went stock everything

 

Really? And what is your basis for making this statement? I am certain that it can't be acutal experience...

I am running an S472 with a 1.58 A/R and it spools quite nicely on a stock internal 5.3 The turbo came off of a 3406B (C15) Caterpillar...so let's say the price was right. I had many people tell me that a 327 cube smallblock would never spool it. I have empirical data that suggests differently...

It is definitely not the fastest spool, but will spool faster with some more cubes and compression when my 6.0 goes in.

 

I wasnt aware you could use stock pistons with a .030 overbore.

 

Forced Inductions has them for 599, 1.10 AR or 1.32 AR.

 

its an aftermarket lq4 piston that is .030 over... the motor was built at Thunderbolt over in houston.