Hey guys, I sold my engine and currently looking for a good company to get a 370 shortblock built to hold boost.. Any advice on a good company?
This is what I currently had:
- TBSS intake/throttle body
- LS9 head gaskets
- X-link adapter
- Stock48 custom grind cam for a 370"
- Walbro 400 fuel pump
I was thinking on selling it and going L92 type of heads route because my local mechanic told me those heads can outflow most of the aftermarket cathedral heads but since I already have the complete intake setup I might stick with cathedral heads, any advice for boost?? I was looking at AFR's but i have read that stock 317's can get the job done for boost..
I am looking to run anywhere close to 17-18psi of boost..
What injector size should I get??

Thank you guys in advance for any advice!!

 

Forgot to add, already have the turbo kit 76/75 precision trick performance kit and devilsown water meth kit.. Will be running on pump gas..

 

mine was built by Nickens racing Engines in Conroe tx and I don't know of 1 other on this board..there are a handful of engine builders here for shure

 

Build your own.. Ls motors are the easiest to build.