0-140mph dig Rolling into it w/ 4x4
06-01-2017, 05:45 PM
#1
0-140mph dig Rolling into it w/ 4x4
As stated, it was a closed Air Strip at 545am, Setup Includes the following
AEM Intake
TVS2300@ @ 7 psi
Ice Box for Intercooler
TSP Heads, every Option available
227/241 116a Cam
TSP Longtube Headers
Gutted High Flow Cat
Electric Exhaust Cup Out activated in the center consul
Stock Exhaust for when I want to troll around and do "Hood Rat" things
Stage 3 Snow Performance Methanol Kit'
10 Gallon Methanol tank located in the truck bed
40mL Per Second of Methanol ....thirsty ****
Ice Box for Intercooler...
HAMMER PERFORMANCE INSTALL AND TUNED
Rebuilding Blower this month and will be able to squeeze a little more boost out of it...usually 10lbs HP per pound...600/660 rwp
This video was my first time getting on it. I just rolled into first then went to the floor(WOT). SHould of manually kept it in 3rd until 6krpm....make a big deference and added ice to the intercooler ice box,,,llol
BLower is about to get rebuilt s=to squeeze a few more lbs of boost and call it a a day...Dont want to do forged internals...
this is my page, it is the first video
https://www.youtube.com/my_videos?o=U
AEM Intake
TVS2300@ @ 7 psi
Ice Box for Intercooler
TSP Heads, every Option available
227/241 116a Cam
TSP Longtube Headers
Gutted High Flow Cat
Electric Exhaust Cup Out activated in the center consul
Stock Exhaust for when I want to troll around and do "Hood Rat" things
Stage 3 Snow Performance Methanol Kit'
10 Gallon Methanol tank located in the truck bed
40mL Per Second of Methanol ....thirsty ****
Ice Box for Intercooler...
HAMMER PERFORMANCE INSTALL AND TUNED
Rebuilding Blower this month and will be able to squeeze a little more boost out of it...usually 10lbs HP per pound...600/660 rwp
This video was my first time getting on it. I just rolled into first then went to the floor(WOT). SHould of manually kept it in 3rd until 6krpm....make a big deference and added ice to the intercooler ice box,,,llol
BLower is about to get rebuilt s=to squeeze a few more lbs of boost and call it a a day...Dont want to do forged internals...
this is my page, it is the first video
https://www.youtube.com/my_videos?o=U
Trending Topics
06-06-2017, 09:33 AM
#8
YOU HAVE TO REMEMBER THIS IS ABOUT A MILE ABOVE SEA LEVEL WITH DA'S IN THE 8000 Range.... I also have just water in my Intercooler Ice Tank..beleive it or not, but that ice does wonders!
NOW?? Sea Level it would be ripping much harder....This video I had to roll into the throttle, as it was my first time on the new set up
NOW?? Sea Level it would be ripping much harder....This video I had to roll into the throttle, as it was my first time on the new set up
Last edited by TVS/HC; 06-06-2017 at 09:45 AM. Reason: link not workinh
