Nelson Tune: 07 Avalanche stock vs tuned
#1
Thread Starter
Performance Trucks Sponsor
iTrader: (5)
Joined: Jul 2002
Posts: 1,439
Likes: 0
From: san antonio, tx
Here you go, I wanted to see what kind of gains could be had from a new Av. I wasn't too interested in getting every last hp, we're doing heads/cam/turbo on it, so we needed to get started on the build right away.
After a quick mail order tune here are the results:
33HP and 31TQ gain from just a quick tune, these trucks have a lot of power left in them.
Hi Res
HiRes

I'll keep you guys updated on the results of the h/c/turbo install.
later,
allen
After a quick mail order tune here are the results:
33HP and 31TQ gain from just a quick tune, these trucks have a lot of power left in them.
Hi Res
HiRes

I'll keep you guys updated on the results of the h/c/turbo install.
later,
allen
Trending Topics
#8
Originally Posted by way2much_01
I don't get it though how come they say the new 5.3 have 320 HP on the chevy site and you got 217?
#9
Thread Starter
Performance Trucks Sponsor
iTrader: (5)
Joined: Jul 2002
Posts: 1,439
Likes: 0
From: san antonio, tx
Originally Posted by way2much_01
I don't get it though how come they say the new 5.3 have 320 HP on the chevy site and you got 217?
I was just looking for the gain, not really interested in the numbers.
allen
#10
I'm not familiar with this type of dyno. Is this the one you use at your shop? How does it read compared to dynojet? Numbers usually lower or higher than the popular dynojet? 217rwHp seems pretty low for a 320Hp motor...dats a crap load of drivetrain loss...
Allen, I get my 07' 2wd Sierra Denali on Friday....Do you recommend me putting a certain number of miles on the truck prior to my drive down to San Antone? What rwHp numbers are you getting from the new 6.2's with only intake and exhaust?
Allen, I get my 07' 2wd Sierra Denali on Friday....Do you recommend me putting a certain number of miles on the truck prior to my drive down to San Antone? What rwHp numbers are you getting from the new 6.2's with only intake and exhaust?
Last edited by markislive78; Jul 18, 2007 at 03:05 PM.


