Dyno tuned the AVY today! 5.3L-Radix, etc.
#1
Installed a Magnacharger, 3.3 pulley, 90mm LS2 TB, E-Fans, stock cam, Outlaw CIA, Pacesetter longtubes and ORY, Flowmaster American Thunder. This is on an '03 Avalanche 5.3L, with 20's...
Pulled 377RWHP and 429RWTQ after three pulls it over heated big time, found that my mail order tune not only was set up for 26Lb injectors (hench halfing to take it to the dyno shop and have it tuned) it was not set up to run my new efans as it was supposed to be either
Did get to make several in the truck on the street runs with the tuner and HP-tuners and it runs very well now.
I'm pretty happy now, was pretty scared when I tried to run it with the first tune...
Pulled 377RWHP and 429RWTQ after three pulls it over heated big time, found that my mail order tune not only was set up for 26Lb injectors (hench halfing to take it to the dyno shop and have it tuned) it was not set up to run my new efans as it was supposed to be either
Did get to make several in the truck on the street runs with the tuner and HP-tuners and it runs very well now.
I'm pretty happy now, was pretty scared when I tried to run it with the first tune...
#4
Originally Posted by Stoichiometric
Cool, glad you got the problems worked out. Did you make the 377 hp with the bad tune or the shop's tune? Any dyno graph available for posting?
The shop didn't have a disc to copy the run to. I have a hard copy. I'll try and stop by the shop on Monday and bring a disc. They tuned a vett today that was supercharged 500hp, and they are now an STS dealer they had a '07 Vett that they are going to install the twin turbo set up on. I'd like a ride in that one!
and thanks, the truck finally runs like it should..
#6
Originally Posted by NegraRCSB2X4auto
just wondering who did your first tune?
d
Thread
Thread Starter
Forum
Replies
Last Post
FlowmasterMufflers
Ford Engine & Exhaust Performance
0
Jul 22, 2015 01:29 PM
FlowmasterMufflers
Foreign Performance Discussion
0
Jul 9, 2015 12:23 PM
FlowmasterMufflers
Foreign Performance Discussion
0
Jul 9, 2015 12:00 PM





