Went to the track
#31
Those e/t streets usually like 14-15psi from what I've seen. Either way around 17 is too much IMO. I run my Hoosiers at 12-13psi... At 12 they spin on the rim pretty bad. Haven't anything of mine down the track in a little while though
been playing with everyone else's truck too much
been playing with everyone else's truck too much
#32
Thread Starter
Joined: Sep 2007
Posts: 5,883
Likes: 2
From: Crowley, TX
Thanks everyone. I have the et streets and the last run was around 15psi and I did a big burnout, and that got me the 1.79. I'm going to mark the tire next time to see if it's spinning. These don't hook as good as hoosier full slicks i've used before.
Checking my slips shows exactly 1 tenth off my 60' dropped over 2 tenths in the 1/4... So a 1.6 60' and I should have 11's...
Checking my slips shows exactly 1 tenth off my 60' dropped over 2 tenths in the 1/4... So a 1.6 60' and I should have 11's...
#33
yeah track prep sucked big time. great times thou david! maybe a full slick is what you need. I am pricing some 28/10/16's from alex monday. you want me to text you a price?your setup has the most potential out of all of us, 109mph is smokin n/a!
#35
Thanks everyone. I have the et streets and the last run was around 15psi and I did a big burnout, and that got me the 1.79. I'm going to mark the tire next time to see if it's spinning. These don't hook as good as hoosier full slicks i've used before.
Checking my slips shows exactly 1 tenth off my 60' dropped over 2 tenths in the 1/4... So a 1.6 60' and I should have 11's...
Checking my slips shows exactly 1 tenth off my 60' dropped over 2 tenths in the 1/4... So a 1.6 60' and I should have 11's...
on yeah get some lighter rims up front
dunno what those weigh or what size they are but they look heavy
#37
#40




