New best time
#12
Thread Starter
Mod with training wheels
iTrader: (16)
Joined: Feb 2009
Posts: 7,741
Likes: 207
From: Detroit
I do still think it has an 11 in it, long as I can keep all eight cylinders in the game lol. It felt really strong, no complaints from the trans or rear end/suspension. I may try to nail down that 11 second slip, but this truck has reached its prime. The next project can't come soon enough
#15
NGK BR7EF (or part #3346) is one heat range colder than the TR6, and it's non-projected.


You're trying to prevent the strap on the spark plug from turning red-hot and becoming a "glow plug", because that causes the fuel charge to ignite (pre-detonate) too soon. That pre-det will blow the strap off the plug, and can even blow a hole in a piston.
Also, looking again at your plugs, you're running too rich.


You're trying to prevent the strap on the spark plug from turning red-hot and becoming a "glow plug", because that causes the fuel charge to ignite (pre-detonate) too soon. That pre-det will blow the strap off the plug, and can even blow a hole in a piston.
Also, looking again at your plugs, you're running too rich.
#17
I agree! nice pass for 7 cylinders. you should look into br7ef or br8ef depending on how much boost.
Just fyi, I run br7ef n/a. I will swap in br8ef for 150-200 shot. my motor did not like a projected plug with the qinch I am running.
Just fyi, I run br7ef n/a. I will swap in br8ef for 150-200 shot. my motor did not like a projected plug with the qinch I am running.



