1969x11

iTrader: (38)

So I picked up a set of widened factory 17's and I was thinking about trying these in the 305/45/17 flavor. I'll be running them on all 4 corners. Anyone had any experience with them?

RS/SS 4.8

iTrader: (13)

Yup cut a 1.52 60ft on my 4905lb brick. Drive solid on the street and i got cought in some rain and they did pretty good.

1969x11

iTrader: (38)

That's what I was wanting to hear. You must be making some serious steam to power out that 60 time!

RS/SS 4.8

iTrader: (13)

I launch at 3k rpm with 7psi of boost and dead hook on a 3400rpm converter. That 4.01 first gear in the 6l90 probobly helps lol. It runs good but the turbos done on the top end. It wont go faster than 114mph no matter how much boost i throw at it.

1969x11

iTrader: (38)

I've done an 1.70 60' on some yokahama geolanders so far. That's leaving at 3200rpm on the footbrake and around 6psi. I really want 10's on street tires but I feel like at the limit of gen 3 rods!

BigBlock90

iTrader: (4)

I run the ET Street SS drag radial also and have cut some 1.47 sixty foot times in my truck at 4500lbs. They work very well