Drag Racing Fastest Truck List inside, sortable for any make/model/engine listed.
TIME SLIP DATABASE

Heads Up LS Powered Full Size Truck Class at LSFest2k15

Old Jan 6, 2015 | 01:44 AM
  #1  
Blown06's Avatar
Thread Starter
8 Second Truck Club
iTrader: (32)
 
Joined: Apr 2006
Posts: 5,662
Likes: 47
Default Heads Up LS Powered Full Size Truck Class at LSFest2k15

I'm starting this thread to try and see how much interest can be generated. We need to hear from those who would have a truck that would fit some general guidelines (like full size, capable of running 9.99 or quicker, minimum weight of say 3500-3600 lbs and of course ls powered) for a heads up class at lsfest2k15.

Please post up your combination including Year, Model, Power Adder, Suspension (front and rear), Weight, best et so far (not what you think it could run), and a general avg of et's.

This is for those guys that would absolutely commit to coming.

I'll start:

I would 100% show up for a heads up class. My combo is as follows:
2006 Chevy Silverado 1500 Single Cab Short Bed
F2 Procharged iron 408
Coil over conversion on the front
4-link in the rear
Last time it was scaled it weighed 4110 ready to go. Currently undergoing a few minor changes and should weigh in around 3850 ready to go.
Best pass to date: 8.99 @ 154 mph
Has run 9 teens to 9 twenties consistently


Come on guys, spread the word and lets get this going. If someone is in daily contact with flaco, please let him know and tell him to post up.
Reply
Old Jan 6, 2015 | 07:45 AM
  #2  
SlowDude's Avatar
Launching!
iTrader: (4)
 
Joined: Aug 2012
Posts: 225
Likes: 0
From: Houston
Default

Don't think my truck would ever be that fast but I def would come watch!
Reply
Old Jan 6, 2015 | 08:07 AM
  #3  
BigKID's Avatar
TECH Veteran
20 Year Member
Liked
iTrader: (5)
 
Joined: Dec 2001
Posts: 4,947
Likes: 242
From: Panama City, Fl
Default

Although I don’t quite meet the criteria for being competitive in a heads-up class, I really hope you can make this happen. I have been to LS Fest the last two years and plan to be back again this year. I plan to have the truck consistently in the mid-high tens this year and would enter the class, entry fee dependent, just to make the field if needed.
Reply
Old Jan 6, 2015 | 09:08 AM
  #4  
sprayedenali's Avatar
TECH Fanatic
iTrader: (11)
 
Joined: Dec 2009
Posts: 1,573
Likes: 0
From: Birmingham, AL
Default

Id love to be able to do this!!!!!!!!!

you know where my truck sits...
Reply
Old Jan 6, 2015 | 09:22 AM
  #5  
Atomic's Avatar
I have a gauge for that
15 Year Member
Loved
Liked
Community Favorite
iTrader: (42)
 
Joined: Jan 2006
Posts: 16,282
Likes: 438
From: Huntsville, AL
Default

Go figure this happens after I trade my turbo kit away, sigh. I doubt the little blower would put me in the 9s

I am not sure how many you would get that can run that fast are actually certified to run that (cage, sfi parts, etc.). You might make it 10.9 or faster and im sure you would get more. 10.9 is no slouch but the jump from 10.9 to 9.9 is huge as im sure you know.
Reply
Old Jan 6, 2015 | 09:32 AM
  #6  
TXsilverado's Avatar
Moderator
20 Year Member
Loved
Liked
Community Favorite
iTrader: (19)
 
Joined: Jan 2005
Posts: 18,364
Likes: 291
From: Humble Texas
Default

maybe they should call the event LS1fullsize...
Reply
Old Jan 6, 2015 | 11:44 AM
  #7  
SumtinCoo's Avatar
Staging Lane
iTrader: (8)
 
Joined: Dec 2011
Posts: 80
Likes: 1
Default

I'd 100% be down for this.

01 Sierra RCSB
370 ci with spray
Currently swapping to 4l80 from t56
Stock suspension lowered 4/6
Caltracs
Weighs 4500 with me
Best pass 1/8 - 8.00 @ 87 spinning and banging gears all motor no spray
Reply
Old Jan 6, 2015 | 11:48 AM
  #8  
TXsilverado's Avatar
Moderator
20 Year Member
Loved
Liked
Community Favorite
iTrader: (19)
 
Joined: Jan 2005
Posts: 18,364
Likes: 291
From: Humble Texas
Default

Originally Posted by SumtinCoo
I'd 100% be down for this.

01 Sierra RCSB
370 ci with spray
Currently swapping to 4l80 from t56
Stock suspension lowered 4/6
Caltracs
Weighs 4500 with me
Best pass 1/8 - 8.00 @ 87 spinning and banging gears all motor no spray
he means 9.99 or quicker in the 1/4 mile. I'm sure your truck runs hard, but I doubt it's ready to run with the big dogs at 87mph 1/8 trap.
Reply
Old Jan 6, 2015 | 12:44 PM
  #9  
Atomic's Avatar
I have a gauge for that
15 Year Member
Loved
Liked
Community Favorite
iTrader: (42)
 
Joined: Jan 2006
Posts: 16,282
Likes: 438
From: Huntsville, AL
Default

Originally Posted by SumtinCoo
I'd 100% be down for this.

01 Sierra RCSB
370 ci with spray
Currently swapping to 4l80 from t56
Stock suspension lowered 4/6
Caltracs
Weighs 4500 with me
Best pass 1/8 - 8.00 @ 87 spinning and banging gears all motor no spray
Youre going to need to be in the 6.4-6.5 1/8th mile range to be close to the limit.

Last edited by Atomic; Jan 6, 2015 at 03:36 PM.
Reply
Old Jan 6, 2015 | 02:13 PM
  #10  
SumtinCoo's Avatar
Staging Lane
iTrader: (8)
 
Joined: Dec 2011
Posts: 80
Likes: 1
Default

Lol didn't even see the 9.99 or quicker part. My bad lol reading > me Yeah I know it's no where close to that. Doubt I'd even be in the 10s
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:42 AM.