Well here are my time slips from last weekend. Finally got around to scanning them in. Nothing special, but it's a start. I'm vehicle 5980.


1/4ET: 15.67
1/4MPH: 87.57
1/8ET: 10.06
1/8MPH: 69.56
60': 2.32
Make:Chevy
Year:2003
Body:ECSB
Drive(2WD or 4WD):4WD
Transmission(model number would be nice):4L60e
Engine Size(Liter):5.3
Weight: (WITH YOU IN IT) Heavy
Main Power(NA or TC or SC): NA
Power 2(nitrous or nothing): none
Tires(see options at top of FTL): street
Do you have headers?: LT headers
Do you have a custom Intake(CAI): No
Do you have an Underdrive Pulley: No
TorqueConverter(if stock do you know the size): Yank TT3000
Heads(yes for anything besides what comes stock on it):stock
Cam(anything besides stock):stock
Gears(even if stock what size?): 3.73
Rear a LSD or POSI:yes G80
Tune(yes or no is fine): Yes

And just so you don't focus too hard on my time slips, check this out.

 

me like SbB ALOT!!!

 

What timeslips? Nice boobes, ah I mean tatas I mean babes.......
Congratson making it to the track and setting down your baseline. You will go faster as $ allows

 

You gotta start somewhere.. Congrats, and nice looking truck.. Girls aint bad either

 

What's up with the 60'??? You have a 3000 stall...???

 

I don't know...

Yes but it's a second hand rebuilt Yank, so I have always wondered if it performs the same as a brand new one would.

I'm sure my tuning still needs work, and hopefully the cam will be going in soon.

 

............i'm wondering what my 5.3 will do with a stall and a cam and a set of E-fans plus a posi and 3:73s or 3:90s....

 

you know, i have a TT3000 stall too and my 60 foots aren't that good either. i pull like 2.1s. before putting on LTs i pulled 2.0s. but i see guys pulling sub-2.0 60s with a lot less mods. maybe it's because i'm launching in 4wd? it feels like it boggs just a little bit. a 3200 or 3400 stall would be better i think...

 

I was launching in 2wd. Track prep was decent so I didn't figure I needed to bother with a 4wd launch. It did spin a little but not much. I probably would have tried a 4wd launch just to see if it made a difference, but it was a busy night and I was lucky to get 2 runs in. Might be my lack of track experience too.

 

How much timing are you running and what RPM are you shifting?