? about track time
#1
TECH Fanatic
Thread Starter
iTrader: (28)
Join Date: Mar 2002
Location: waynesburg, KY.
Posts: 1,384
Likes: 0
Received 0 Likes
on
0 Posts
? about track time
ok I have a 2005 Silverado CCSB,2wd 5.3 l with a 212 218 low lift cam. 2600 stall. 411 gears. tranny is 4l60e that is built. LT headers, Magnaflow exhaust. CAI, UD Pulley, tune. it has 20 inch factory rims, with new tires. hard Tonnaue cover.
went to the track the other night. it went
1st run 2nd run 3rd run
60'.....................2.2828 2.2953 2.3163
330...................6.5073 6.5228 6.5295
1/8 mile.............9.9493 9.9632 9.9640
1/8 mile mph...... 72.64 72.66 72.79
1/4 mile.............15.3432 15.3511 15.3513
and 1/4 mile mph.. 90.23 90.42 90,34
is this about right?
looking for recommendations on lighter rims and tires also. thanks
went to the track the other night. it went
1st run 2nd run 3rd run
60'.....................2.2828 2.2953 2.3163
330...................6.5073 6.5228 6.5295
1/8 mile.............9.9493 9.9632 9.9640
1/8 mile mph...... 72.64 72.66 72.79
1/4 mile.............15.3432 15.3511 15.3513
and 1/4 mile mph.. 90.23 90.42 90,34
is this about right?
looking for recommendations on lighter rims and tires also. thanks
Last edited by LARRY01Z28; 05-04-2017 at 10:36 PM.
#2
TECH Senior Member
iTrader: (2)
With a 60 foot like that and a heavy truck with very heavy wheels it seems that is maybe what it will run.
What has the temp outside and DA?
Hot temps will hurt performance too. Getting some stock 16's or 17's with lighter tire should help you quite a hit. 20's just have so much rotating mass to overcome.
What has the temp outside and DA?
Hot temps will hurt performance too. Getting some stock 16's or 17's with lighter tire should help you quite a hit. 20's just have so much rotating mass to overcome.
#4
TECH Junkie
For comparison my '07 weighed ~ 5000 race weight and ran 10.39 stock on 20's. My '05 weighed probably 4750 race weight and did 9.84 stock on 17's. Your 60' isn't very good there's 9.50's in it at that mph no problem.