Dodge Truckers! lets see what you got :)
#11
Thankx Guys,
That 13.59 was my first time out on the juice and was a 35 Shot! My next time out I had the 50 shot pills in it but the altitude density went to pot and I only ran a 13.50 and I have not been out since. I have another project to finish before I go back out but I am trying for 12's on a 75 shot.
TJ
That 13.59 was my first time out on the juice and was a 35 Shot! My next time out I had the 50 shot pills in it but the altitude density went to pot and I only ran a 13.50 and I have not been out since. I have another project to finish before I go back out but I am trying for 12's on a 75 shot.
TJ
#12
Originally Posted by MrDestinE
Thankx Guys,
That 13.59 was my first time out on the juice and was a 35 Shot! My next time out I had the 50 shot pills in it but the altitude density went to pot and I only ran a 13.50 and I have not been out since. I have another project to finish before I go back out but I am trying for 12's on a 75 shot.
TJ
That 13.59 was my first time out on the juice and was a 35 Shot! My next time out I had the 50 shot pills in it but the altitude density went to pot and I only ran a 13.50 and I have not been out since. I have another project to finish before I go back out but I am trying for 12's on a 75 shot.
TJ
#14
So far my best dyno in third gear is 292.2(262 stock 2nd gear) rwhp and 323.4(278 stock 2nd gear) rwtq(SAE corrected). The horsepower reading is at 5200 RPM(Due to shifting into 4th) and max power with stock PCM is a achieved at around 5700-5900 RPM(God please send me a real programer).
Best time is 14.87 using the Richmond Track at 5320-40(gas used getting up there) lbs certified scale weight. This is in full street trim.
Without weight reduction but with are better programmer(harder shifts) I can expect a 14.5 with my current setup.
Here it is:
Best time is 14.87 using the Richmond Track at 5320-40(gas used getting up there) lbs certified scale weight. This is in full street trim.
Without weight reduction but with are better programmer(harder shifts) I can expect a 14.5 with my current setup.
Here it is:
Last edited by Jrgnd; Jun 29, 2005 at 10:11 PM.
#15
Originally Posted by Jrgnd
So far my best dyno in third gear is 292.2(262 stock 2nd gear) rwhp and 323.4(278 stock 2nd gear) rwtq(SAE corrected). The horsepower reading is at 5200 RPM(Due to shifting into 4th) and max power with stock PCM is a achieved at around 5700-5900 RPM(God please send me a real programer).
Best time is 14.87 using the Richmond Track at 5320-40(gas used getting up there) lbs certified scale weight. This is in full street trim.
Without weight reduction but with are better programmer(harder shifts) I can expect a 14.5 with my current setup.
Best time is 14.87 using the Richmond Track at 5320-40(gas used getting up there) lbs certified scale weight. This is in full street trim.
Without weight reduction but with are better programmer(harder shifts) I can expect a 14.5 with my current setup.
#16
Well what do ya know, go to lurk on LS1tech and come to find the whole truck section has been moved and us Dodge guys have been given our own section.
Here's Mine:

Mod's and times are in my sig. Being my track is so high in the air, my times look crappy compared to everyone else down at sea level. Using the NHRA Correction factors, my times look a little better. On my fastest run I was only able to get a 2.259 60' when I've gotten a 2.15 60' on a slower run. This truck has 14.1's in it if I can hook up right and get down to sea level.
Here's Mine:

Mod's and times are in my sig. Being my track is so high in the air, my times look crappy compared to everyone else down at sea level. Using the NHRA Correction factors, my times look a little better. On my fastest run I was only able to get a 2.259 60' when I've gotten a 2.15 60' on a slower run. This truck has 14.1's in it if I can hook up right and get down to sea level.
#17
03 dodge ram loaded longbed.....with just a few cheap mods i ran 13.71 at 99mph then i got tired of asswipes saying i had to be spraying nitrous to run 13.71 ........so i put a nitrous kit on a year ago and have run a best of 12.44 at 108mph with a 125hp shot spinning the mickey thompson street tires ......now i have full slicks Hoosier 28x10x16s and need to get to the track for some new times useing a bigger shot of nitrous ........heres one of my 12 second videos....http://home.comcast.net/~suzukirules/Hemi777_12.49.wmv
.
Last edited by h777; Jun 29, 2005 at 02:10 PM.
#19
Originally Posted by SierraCrew
Mr. Destine,
What color is your truck? I know I have seen you out at HRP before. Actually, I think I've been beat by you. lol.
What color is your truck? I know I have seen you out at HRP before. Actually, I think I've been beat by you. lol.
and if I could figure out how to post the picx... I must be doing something wrong..

Ah HAH! ok this is with the my previous 20's went from 14.30's to 13.90's with the move to the 17's and an endless traction problem! Latest mod is the Nitto drag radials on 18's
but no better 60's???? WTF?? No spin thoughTJ
Last edited by MrDestinE; Jun 29, 2005 at 07:35 PM.







